Cast Aluminum Head Repair: 1954 Nash Healey

We have started a three part series on how to make a weld repair on Cast Aluminum. We were sent a 1954 Nash Healey Head that was made of cast Aluminum and had a large crack in it. Cast Aluminum welding is always difficult. You really never know what to expect, because the material is so dirty and unpredictable. In this series we will be showing you all kinds of different tips and tricks to make sure you get the best possible results. In this episode we are going to:
 
→ Inspect the part to decide the best way to weld it.
→ Show the multi step process for prepping and grinding the part
→ Dialing in your welder on sample material
→ Tacking the Cast Aluminum
 


 

 

Episode 2:
In Part 2, we are going to head over to the Mill Rite to prep the backside of the part. We will mill out the crack and then bring the part back to the table to full welding.



Episode 3:
This is the third and final part of our series on how to repair cracks in Cast Aluminum headers using the TIG welding process. In the previous episodes, we showed you how to prepare the work piece, set your machine, groove out the crack and tack and weld the top side of the crack. In this episode we are going to demonstrate how to finish the welding and flatten out the distortion to relieve any stresses once it is put back together.


====================================================


View more TIG Welding Videos from Weld.com
 
Subscribe on YouTube and Never Miss a Video!
 
Have a question about welding? Ask Mr. TIG on the Welding Forum and have your question answered in a video!
 
-----------------------------------------------------------------------------
 
TIG Time is a TIG welding video series that is dedicated to making our audience a better community of welders. Each show is loaded with welding tips, tricks and hints that will help you drop that perfect bead every time! All videos are shot from "behind the hood" so you can get the welders perspective. If you have a request or are in need of welding help; let us know with a comment below!

New episodes every Friday!

Check out some of the gear we use in our videos:

TIG Time:
ArcOne Welding Helmets
CK WorldWide TIG Torches
West Chester Protective Gear
Tab and Slot Welding Tables
AquaSol EZ Wipes

#MIGMonday:
ESAB Power Sources
ArcOne Welding Helmets
Tab and Slot Welding Tables